Xtramus DApps-TAP V1.3 - Manual (Page 36)

7.2. Tool Bar
The Tool Bar contains buttons that allow you to reconnect NuDOG-301C/801/101T, view Counter, view
USC A/B, view Chart and Configure Port A/B. Please refer to the section down below for more detail
descriptions regarding to Quick Launch Buttons.
7.2.1. Reconnect
Reconnect
If the USB connection between your PC and NuDOG-301C/801/101T is down, a
“Disconnected” icon
will be shown in “System Connection Status”.
Press Reconnect button to re-establish the connection between your PC and
NuDOG-301C /801/101T. If the connection has been established successfully, a message
window will pop up, and the “System Connection Status” will be shown as
“Connected”
.
7.2.2. Counter
Counter
If you click the Counter button, the
Counter Window will pop up showing
the status of the packets.
For more information, please refer to
the 7.1.3.1. Counter Window.
36
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®