Nudog-301c interface ports – Xtramus DApps-TAP V1.3 User Manual
Page 10
2.4. NuDOG-301C Interface Ports
NuDOG-301C Hardware Overview
A LEDs LEDs that displays NuDOG-301C’s status.
B Mini-USB
Port*
5 Pin Mini-B Receptacle USB Port. You can manage, configure, or
update firmware/FPGA when connecting NuDOG-301C to your PC.
While under TAP mode, this mini-USB port can also re-direct tapped
packets to PC.
C Power
Jack 12V DC Power Jack for connecting external power adapter.
D Cooling
FAN Fan hole with internal fan for ventilation.
E Diagnostic
Port 8-Pin Mini-DIN Receptacle Diagnostic Port
F Port B - SFP Port 1000 Mbps Full Duplex SFP Port B
G Port B - RJ45 Port 10/100/1000 Mbps Half/Full RJ45 Port B
Only one port can be
used at the same time.
H Port A - SFP Port 1000 Mbps Full Duplex SFP Port A
I Port A - RJ45 Port 10/100/1000 Mbps Half/Full RJ45 Port A
Only one port can be
used at the same time.
*Please note that when connecting NuDOG-301C with PC via its USB port, DO NOT use a USB hub
10
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES
®