wePresent WiPG-1000 - Manual (Page 9)

9
WiPG-1000 User Manual
→Back
7. WiPG-1000 Receiver Device
1. Connect wePresent WiPG-1000 device to Projector through VGA port and
turn on projector power.
2. It will show the Quick Guide Information, WiFi Network Name, IP Address
and Code on standby screen.
3. If there is sender connected to WiPG-1000 device, it will show the PC-List on
standby screen, conference moderator can use the USB mouse/keyboard to
select the PC and control it remotely.
4. You can also click the feature Icon to browse the Quick Guide for each
feature.