wePresent WiPG-1000 - Manual (Page 35)

35
WiPG-1000 User Manual
→Back
10.3 Conference Control
1. Select “Conference Control” function, it will show current connected sender
list.
2. Enter password and then press [Login]. (default password: moderator)
3. After login, you can see a User List on the screen which indicates all of users
connected to WEPRESENT WIPG-1000 box.
4. There are three columns, “Computer Name”, “Play Control” and “IP
Address”.
5. Play Control, There are six buttons, including Play(Full) , Play Split #1
, Play Split #2 ,Play Split #3 , Play Split #4 and Stop .
6. Uncheck the “Allow Control from this page only”, it will disable the
centralized control and user can project the screen to WiPG-1000 freely.