wePresent WiPG-1000 - Manual (Page 44)

44
WiPG-1000 User Manual
→Back
10.5.8 BrowserSlides Setup
1. Click [BrowserSlides Setup] button to setup the BrowserSlides Feature.
2. Auto Refresh Interval: choose “Manual Refresh”, “10”, “20”, “30”, “45”, “60”
or “90” seconds Refresh Interval.
3. Access Password Control: choose “Disable”, “Use the same password as
Code” or “Use the following Code”
Note:
The WiPG-1000 logged-in user is not identical to BrowserSlides user, and they
both consume the wireless bandwidth for device connection. If there are
more than 10 users logged into WiPG-1000, it is recommended to connect
WiPG-1000 to company network through Ethernet or bridge WiPG-1000 to a
router due to wireless bandwidth concern. User should connect WiPG-1000
via company network or router in order to secure the projection performance.
The BrowserSlides user number should not exceed the recommended number
on the web management page to prevent the connection failure or low
projection performance.
PS. Wireless Projection function and Conference Control function can support
up to 64 users.