beautypg.com

4 built-in web server – UEBO M200 Networked User Manual

Page 54

background image

54 / 68


In the

BT Setup menu, you can configure the following settings. Use UP/DOWN and ENTER

to change the settings.

Set the maximum download rate.

Set the maximum upload rate.

Set the idle hours to start the next download automatically.

Set the seeding hours.

Set to delete the finished torrent files automatically, if you wish.

Set the maximum number of simultaneous download tasks.

8.4 Built-in Web Server

A web server named “Neighbor Web” has been integrated into the Player. To access it, please
follow these steps:
1. Connect the Player to your home network (LAN or WLAN).
2. Find the IP address of the Player in the

SETUP -> NETWORK menu.

3. Type the IP address (e.g., 192.168.3.15) in the Address Bar of Internet Explorer on your

PC. You will see the Neighbor Web page.

4. Depending on how the

Login Control parameter is set under the Setup->Network menu,

you may or may not have to enter your username and password to login. If Login Control is
set to “On”, the default parameter is as follows:

Username : admin

password : 123

5. You can then change the password under Account Management on the Neighbor Web.
6. If the Login Control is set to “Off”, then no login is required and you will be taken directly

into the Neighbor Web.

7. From the Neighbor Web, you can set up the BitTorrent download.