UEBO M200 Networked - Manual (Page 23)

23 / 68
The testing process will take a while, so please be patient. If the test results are OK, the
network information (Profile Name, IP address, Subnet Mask, Gateway, etc.) will be
displayed on the screen.
• The Peer-to-Peer (Or Ad Hoc) Mode
The Peer-to-Peer mode (also called the Ad-Hoc mode or computer-to-computer mode) is
used to directly connect wireless clients together without the need for a wireless router or
access point.
The Ad-Hoc Setup
Press ENTER for the next step, press RETURN to cancel and then press PLAY to
connect.
• WPS (AP)
WPS (Wi-Fi Protected Setup) is used to connect to a Wireless Router or Access Point
directly, without searching for SSID and entering the password. In this mode, you just need
to configure the parameters of your Wireless Router or Access Point supporting the WPS
function. There are two (2) options available to you, PBC mode and PIN (pin code) mode.