UEBO M200 Networked - Manual (Page 12)

12 / 68
1.5 Power On / Off
Power On
After connecting the DC IN jack, press the power button on the front panel; the Player will boot
up and enter the home screen, then the power indicator will turn blue.
Power Off
Press the power button on the front panel; the Player will enter standby mode and the power
indicator will turn red. To power off the Player, unplug the power cord, power off the Player.
1.6 Menu Language
The Player’s system language can be set not only to English but to other languages as well.
You can select the language you want in the Setup menu, which should take effect
immediately.
1.7 HDD Format
For users who wish to install a new SATA HDD into the Player, below are the steps you need to
follow in order to format the hard disk on the Player before usage:
Step 1: Select OK on the Warning page, then press ENTER to confirm. You will see this
message after you have installed the hard disk and powered on the Player.