7 connecting to a lan, 8 connecting to a wlan – UEBO M200 Networked User Manual
Page 11
11 / 68
1.4.7 Connecting to a LAN
To connect to a LAN (Local Area Network) you need a CAT5, CAT5e or CAT6 network cable
(not supplied).
1. Connect one end of the network cable to the Player’s RJ45’s LAN jack.
2. Connect the other end of the network cable to the network router/switch/hub.
1.4.8 Connecting to a WLAN
To connect to the Wireless LAN, you will need a compliant 802.11G or 802.11n USB Wireless
Adapter from
UEBO. This USB Wireless Adapter is an optional item you can purchase
separately by going to t
site. Once you have obtained the USB
Wireless Adapter, you can set it up by following these steps:
1. Make sure the Player’s power is on.
2. Plug the USB Wireless Adapter into the USB host port of the Player.
3. Refer to
Section 3.3, “Changing Network Settings,” for wireless setup instructions.