TVLogic XVM-175W - Manual (Page 36)

36 Multi Format LCD Monitor
6. Other Functions
3. The following represents the different
types of scan mode. When a scan mode is
selected, display skips the next mode if its
required condition is not met.
- OVER SCAN : Zooms in/out of the image to
96% of its original size without changing
the aspect ratio of.
- ZERO SCAN : Zooms in/out of the image
without changing the aspect ratio.
- UNDER SCAN : Zooms in/out of the image
without changing the aspect ratio. Also,
displays the data at the top of the horizontal
blanking block.
- 2:1 SCAN : Magnifies the original image two
times. This feature is available only when the
size of the original image is ½ size or smaller
than the screen size.
- 1:1 SCAN : 1:1 pixel mapping of original
image. This feature is available only when
the size of the original image is bigger than
the screen size. Press [ENTER] button to
rotate the position.
MID LEFT -> TOP LEFT -> TOP MID -> TOP
RIGHT -> MID RIGHT -> BOT RIGHT ->
BOT MID -> BOT LEFT
- FIT WIDTH : In SD mode, zooms in to fit
width of the original image to the width of
the screen without changing the aspect ratio.
- USER ASPECT : Displays in user aspect
ratio of HORIZONTAL and VERTICAL value
that is selected under USER ASPECT item in
[PICTURE] MENU.
- 3 X ZO O M : This feature is only available
under PBP 16:9 mode and displays the
image with 2 x zoom in.
When “3 X ZOOM” message window
appears, press [ENTER] button to activate
vertical position control of image. Use
[UP]/[DOWN] button to adjust the vertical
position of image. Press [ENTER] button
again to activate horizontal position control
of image. Use [UP]/[DOWN] button to adjust
the horizontal position of image.
[3] SCAN
>
XVM-175W_245W-N_325W-EN_V2.4.indd 36 2014-02-12 오후 5:36:20