TVLogic XVM-175W - Manual (Page 27)

Multi Format LCD Monitor 27
●
USER MARKER H1
- Used to control the position of the first user
defined horizontal marker line.
- Marker option USER needs to be selected.
●
USER MARKER H2
- Used to control the position of the second
user defined horizontal marker line.
- Marker option USER needs to be selected.
●
USER MARKER V1
- Used to control the position of the first user
defined vertical marker line.
- Marker option USER needs to be selected.
●
USER MARKER V2
- Used to control the position of the second
user defined vertical marker line.
- Marker option USER needs to be selected.
●
WAVEFORM/VECTOR
- Used to set the Waveform and Vectorscope.
- This feature is available in SDI, COMPOSITE
1/2/3, S-VIDEO, COMPONENT modes.
- Selectable features: OFF, WAVEFORM,
VECTOR, YCbCr, MODE 1(WAVEFORM +
VECTOR), MODE 2(VECTOR + Y/Cb/Cr),
WIDE-Y
- Displays on the bottom right of the screen
and moves above the UMD, if UMD feature is
selected.
* WAVEFORM : Displays the shape and form of
luminance level of a signal.
* VECTOR : Displays color components B-Y and
R-Y of the input signals on the XY axis.
HD and SD inputs are classified into two
kinds, depending on the input. 100% and
75% scales indicated on a display.
* Y/Cb/Cr : Displays each Waveform for
elements of the luminance and Cb/Cr of the
input signal.
* RGB : Displays each Waveform for elements
of the Red, Green and Blue of the input
signal.
* W+V : Displays Waveform and Vectorscope
simultaneously.
* WIDE-Y : Displays stretched luminance
components of the input signal to fit width
of the screen on the bottom of the monitor
XVM-175WD XVM-175WD SDI A SDI A
[6] MARKER [7] WAVEFORM
5. Menu Operations
PAGE II >> PAGE I
USER MARKER H1
USER MARKER H2
USER MARKER V1
USER MARKER V1
MIN
MIN
MIN
MIN
PAGE I >> PAGE II
WAVEFORM/VECTOR
WAVEFORM INTENSITY
WAVEFORM TRANS
VECTOR GAIN x4
LINE WAVEFORM ENABLE
LINE POSITION POSITION
LINE POSITION DRAW
WAVEFORM COLOR
OFF
0
OPAQUE
OFF
OFF
0
OFF
GREEN
XVM-175W_245W-N_325W-EN_V2.4.indd 27 2014-02-12 오후 5:36:19