TVLogic XVM-175W - Manual (Page 28)

28 Multi Format LCD Monitor
XVM-175WD SDI A
[7] WAVEFORM
5. Menu Operations
PAGE I >> PAGE II
WAVEFORM/VECTOR
WAVEFORM INTENSITY
WAVEFORM TRANS
VECTOR GAIN x4
LINE WAVEFORM ENABLE
LINE SELECT POSITION
LINE SELECT DRAW
WAVEFORM COLOR
OFF
0
OPAQUE
OFF
OFF
0
OFF
GREEN
●
WAVEFORM INTENSITY
- Used to control the brightness of the
WAVEFORM/VECTOR display.
- Available values are between 0 ~ 30. The
higher the number the brighter the
Waveform will be.
●
WAVEFORM TRANS
- Used to control the transparency level of the
WAVEFORM/VECTOR.
- Available values are OPAQUE and TRANS.
* If the option is set to OPAQUE, the main OSD
will overlap with the WAVEFORM/VECTOR.
However, it will automatically display it as
transparent and goes back to opaque if the
main OSD disappears.
●
VECTOR GAIN x4
- Zoom in VECTOR x4
●
LINE SELECT ENABLE
- This item is utilized to display the entire data
or one line data on the waveform.
●
LINE SELECT POSITION
- In WAVEFORM/VECTOR, use the Up/Down
button to select User’s desired line.
●
LINE SELECT DRAW
- ON/OFF the line indication for line select
feature.
- Activates only when the LINE SELECT ENABLE
feature is enabled.
- When this item is set to OFF, the Line
Waveform still displays if LINE WAVEFORM is
enabled.
●
WAVEFORM COLOR
- Used to change the color of WAVEFORM.
- Available values are WHITE and GREEN.
WAVE
FORM
WAVE
FORM
VEC
TOR
VEC
TOR
Y/R
WAVEFORM
Cb/G Cr/B
Position changes if the value
changes in LINE SELECT option
and the waveform of the selected
position displays.
WAVEFORM/VECTOR : WAVEFORM
LINE POSITION SELECT : ON
LINE POSITION DRAW : ON
WAVE
FORM
XVM-175W_245W-N_325W-EN_V2.4.indd 28 2014-02-12 오후 5:36:19