TVLogic XVM-175W - Manual (Page 17)

Multi Format LCD Monitor 17
●
DITHERING
- This item enables dithering to 10 bits. (Not
supported in this model)
●
FILTER
- This item toggles the 4:4:4 video processing
filter On/Off for smoother transition
between colors.
●
FAST MODE
- Used to minimizes the de-interlacing
processing time delay and improves the
quality of fast moving and fine details under
interlaced format.
- Since the function of this feature is to
minimize the de-interlacing dealys, it will not
be effective under progressive format.
- Feature bypasses deinterlacer, playing back
2 full fields per frame. Also reduces signal
processing delay for reduced audio/video
delay.
●
FORCE psf
- Used to forces psf mode for psf signals,
overriding the automatic psf detection.
- If this feature is turned off, the unit checks
for the psf signal first, then searches for the
remaining modes.
●
FILM MODE DETECTION
- This item toggles Film Mode ON/OFF.
●
SDI FORMAT
- Used to select the SDI input format between
Single link and Dual link.
●
SDI SAMPLING
- Used to select input SDI sampling mode in
Dual link.
- Available modes are YCbCr 4:4:4, RGB 4:4:4
and YCbCr 4:2:2.
●
3G FORMAT
- Used to select input format of SDI 3G A/B
support(NORMAL MODE, A 444 10BIT_YCbCr,
A 444 10BIT_RGB, A 444 12BIT_YCbCr, A
444 12BIT_RGB, A 422 12BIT_YCbCr, B 444
10/12BIT_YCbCr, B 444 10/12BIT_RGB, B 422
12BIT_YCbCr, B 422 10BIT_YCbCr, 60P).
●
OUTPUT MODE SELECT
- Used to select the luminance range in SDI
MODE between FULL(255) and
NORMAL(235).
●
INPUT FORMAT SELECT
- Used to select input format between RGB
and YPbPr. Available only in HDMI mode.
●
RGB INPUT MODE
- Used to select luminance value between
RGB255 and RGB235. Available only
in DVI-DIGITAL and HDMI modes.
5. Menu Operations
[2] VIDEO
XVM-175WD SDI A
DITHERING
FILTER
FAST MODE
FORCE psf
FILM MODE DETECTION
SDI FORMAT
SDI SAMPLING
3G FORMAT
OUTPUT MODE SELECT
OFF
ON
OFF
OFF
OFF
SINGLE
YCbCr 444
NORMAL MODE
NORMAL
XVM-175W_245W-N_325W-EN_V2.4.indd 17 2014-02-12 오후 5:36:18