TVLogic LVM-247W - Manual (Page 9)

Multi Format LCD Monitor 9
●
[MENU] button
- Used to activate the OSD menu.
●
[DOWN] button
- Used to move down within the menus during
OSD menu activation and also decrease the
value of the selected feature.
●
[UP] button
- Used to move up within the menus during
OSD menu activation and also increase the
value of the selected feature.
●
[ENTER] button
- Used to confirm a chosen value (or mode).
It may also be used to control the VOLUME
value during OSD menu inactivation.
●
[APERTURE] Knob
- Used to adjust the picture sharpness.
- Control value range: 0 ~ 25
- Unavailable in DVI ANALOG Mode.
●
[BRIGHT] Knob
- Used to adjust the degree of brightness.
- Control value range: -100 ~ 100
●
[CONTRAST] Knob
- Used to adjust the contrast.
- Control value range: -100 ~ 100
●
[Audio out] (PHONE JACK)
- Selects the Left/Right Audio disembedded
signal output or HDMI input signal or external
stereo signal is output through the internal
speaker or the phone jack.
●
[Ethernet & USB]
- Ethernet and USB ports for monitor control,
convenient to update the program for new
function and debugging
●
[STANDBY] lamp
- It affords power supply, which may be
indicated by indication lamp. The lamp is
RED during power supply and GREEN during
system is in operation. In case of power cut
and sudden shut off of the power, our monitor
keep previous setup stage.
●
[POWER] button
- Used to turn power on and off.
●
[TALLY] Lamp
- Tally lamp that can be toggled in green or red
using the REMOTE(RJ-45) port.
3. Controls & Functions
FRONT