Menu operations, 7] waveform, Waveform intensity – TVLogic LVM-247W User Manual
Page 26: Waveform trans, Waveform size, Line select enable, Line position select, Line select draw, Wave form

26 Multi Format LCD Monitor
[7] WAVEFORM
5. Menu Operations
PAGE I >> PAGE II
WAVEFORM/VECTOR
WAVEFORM INTENSITY
WAVEFORM TRANS
WAVEFORM SIZE
LINE WAVEFORM ENABLE
LINE POSITION SELECT
LINE POSITION DRAW
OFF
OFF
OPAQUE
NORMAL
OFF
0
OFF
●
WAVEFORM INTENSITY
- Used to control the brightness of the
WAVEFORM/VECTOR display.
- Available values are between 0 ~ 30. The
higher the number the brighter the Waveform
will be.
●
WAVEFORM TRANS
- Used to control the transparency level of the
WAVEFORM/VECTOR.
- Available values are OPAQUE and TRANS.
* If the option is set to OPAQUE, the main OSD
will overlap with the WAVEFORM/VECTOR.
However, it will automatically display it as
transparent and goes back to opaque if the
main OSD disappears.
●
WAVEFORM SIZE
- Used to control the size of WAVEFORM/
VECTOR.
- Available modes are NORMAL and LARGE.
●
LINE SELECT ENABLE
- This item is utilized to display the entire data
or one line data on the waveform.
●
LINE POSITION SELECT
- In WAVEFORM/VECTOR, use the Up/Down
button to select User’s desired line.
●
LINE SELECT DRAW
- ON/OFF the line indication for line select
feature.
- Activates only when the LINE SELECT ENABLE
feature is enabled.
- When this item is set to OFF, the Line
Waveform still displays if LINE WAVEFORM is
enabled.
WAVE
FORM
WAVE
FORM
VEC
TOR
Y
VEC
TOR
VEC
TOR
Y/R
WAVEFORM
Cb/G Cr/B
Cb
Cr
Position changes if the value changes in
LINE SELECT option and the waveform
of the selected position displays.
WAVEFORM/VECTOR : WAVEFORM
LINE POSITION SELECT : ON
LINE POSITION DRAW : ON
WAVE
FORM
LVM-247W