Other functions, 2] scan – TVLogic LVM-247W User Manual
Page 32

32 Multi Format LCD Monitor
6. Other Functions
3. The following represents the different types
of scan mode. When a scan mode is selected,
display skips the next mode if its required
condition is not met.
- OVER SCAN : Zooms in/out of the image to
96% of its original size without changing the
aspect ratio of.
- ZERO SCAN : Zooms in/out of the image
without changing the aspect ratio.
- UNDER SCAN : Zooms in/out of the image
without changing the aspect ratio. Also,
displays the data at the top of the horizontal
blanking block.
- 2:1 SCAN : Magnifies the original image two
times. This feature is available only when the
size of the original image is ½ size or smaller
than the screen size.
- 1:1 SCAN : 1:1 pixel mapping of original
image. This feature is available only when the
size of the original image is bigger than the
screen size. Press [ENTER] button to rotate the
position.
MID LEFT -> TOP LEFT -> TOP MID -> TOP
RIGHT -> MID RIGHT -> BOT RIGHT -> BOT MID
-> BOT LEFT
- FIT WIDTH : In SD mode, zooms in to fit width
of the original image to the width of the
screen without changing the aspect ratio.
- USER ASPECT : Displays in user aspect
ratio of HORIZONTAL and VERTICAL value
that is selected under USER ASPECT item in
[PICTURE] MENU.
- 3 X ZO O M : This feature is only available
under PBP 16:9 mode and displays the image
with 2 x zoom in.
When “3 X ZOOM” message window appears,
press [ENTER] button to activate vertical
position control of image. Use [UP]/[DOWN]
button to adjust the vertical position of
image. Press [ENTER] button again to activate
horizontal position control of image. Use
[UP]/[DOWN] button to adjust the horizontal
position of image.
[2] SCAN
>