TVLogic LVM-247W - Manual (Page 14)

14 Multi Format LCD Monitor
5. Menu Operations
●
BRIGHT
- Used to set the brightness level from -100
to 100.
●
CONTRAST
- Used to set the contrast level from -100 to
100.
●
CHROMA
- Used to set the saturation level from -50 to
50.
●
PHASE
- Used to set the phase(hue) level from -50
to 50.
- Activates only in Analog signal input.
●
APERTURE
- Used to set the picture sharpness level from
0 to 25.
●
NTSC SETUP
- Used to set the black level of NTSC video as
0(zero setup) or 7.5 IRE.
- Activates when NTSC video signal is input
through COMPOSITE 1/2/3 or S-VIDEO
terminal.
●
VGA H POSITION
- Used to set the VGA H position from -15 to 15.
Only Available in DVI Analog mode.
●
VGA V POSITION
- Used to set the VGA V position from -10 to 10.
Only Available in DVI Analog mode.
●
FOCUS ASSIST LEVEL
- Used to set the edge difference value
between the edges in an image.
- Available values are from 0 to 100. Larger
value means more sophisticated detail
detection.
- Designated color is displayed when the
difference of the edges exceeds the previously
set value.
- This features is available only when the
FOCUS ASSIST mode is selected.
●
FOCUS ASSIST COLOR
- Used to select the color of FOCUS ASSIST.
- Available values are red, green, blue and
user.
●
USER ASPECT HORIZONTAL
- Used to set the Horizontal size of the screen.
Activates only when the Scan mode is set to
USER ASPECT.
●
USER ASPECT VERTICAL
- Used to set the Vertical size of the screen.
Activates only when the Scan mode is set to
USER ASPECT.
●
NOISE REDUCTION
- Configure 3D-Noise Reduction filter.
- Adjustment range is from 0 to 10
- Turn off 3D-Noise Reduction Filter, when the
value is “0”.
[1] PICTURE
LVM-247W LVM-247W SDI A SDI A
PAGE I >> PAGE II
BRIGHT
CONTRAST
CHROMA
PHASE
APERTURE
NTSC SETUP
VGA H POSITION
VGA V POSITION
PAGE II >> PAGE I
FOCUS ASSIST LEVEL
FOCUS ASSIST COLOR
USER ASPECT HORIZONTAL
USER ASPECT VERTICAL
NOISE REDUCTION
0
0
0
0
0
7.5IRE
MIN
MIN
0
RED
1920
1080
MIN