TVLogic LVM-247W - Manual (Page 10)

10 Multi Format LCD Monitor
3. Controls & Functions
REAR
●
[LAN]
- Ethernet port for easy firmware updates and
remote control.
●
[AUDIO IN] (Phone Jack)
-External Audio in for Stereo Speaker out. [AC IN]
- Used to supply AC power; 100V~240V input
range.
●
AC IN
- 100~240V AC 50/60Hz
●
DC IN
- 24V DC
When using the product make sure to ground
before connecting the input signal line.
The unit may not operate properly if the input
line is connected before the GND is connected.
Connector Composite Component S-Video
1 CVBS1 Y G Y
2 CVBS2 Pb B No Con.
3 CVBS3 Pr R C
●
[RS422 IN/OUT] (RJ-45)
- Used to control the monitor with protocol
provided by TVLogic or to support TSL
protocol.
●
[REMOTE] (RJ-45)
- Provides connection to control equipment
for external monitor control.
●
[RS-232]
- Factory program port used for automatic
alignment.
●
[CVBS1/Y/G/S-Y] (BNC)
- Signal input terminal used to feed the
monitor COMPOSITE 1, S-VIDEO Y,
COMPONENT Y and RGB G signals.
●
[CVSBS2/Pb/B] (BNC)
- Signal input terminal used to feed the
monitor COMPOSITE 2, RGB B and
COMPONENT Pb signals.
●
[CVSBS3/Pr/R/S-C] (BNC)
- Signal input terminal used to feed the
monitor COMPOSITE 3, S-VIDEO C,
COMPONENT Pr and RGB R signals.
●
[HDMI(HDCP)] (HDMI)
- Signal input terminal for HDMI signal.
●
[DVI-I]
- Signal input terminal for DVI ANALOG or DVI
DIGITAL signal.
●
[SDI-A IN] (BNC)
- HD/SD SDI signal input terminal for SDI A.
●
[SDI-A OUT] (BNC)
- HD/SD SDI signal output terminal for SDI A.
●
[SDI-B IN] (BNC)
- HD/SD SDI signal input terminal for SDI B.
●
[SDI-B OUT] (BNC)
- HD/SD SDI signal output terminal for SDI B.
DC IN socket
1,2 : GND
3,4 : +24V
Video input connection method.