TVLogic LQM-241W - Manual (Page 8)

LQM-241W
24” I
nt
eg
ra
te
d m
ul
ti f
orma
t HD Q
uad in
pu
t mo
ni
to
rs
06
Name & Function of Each Part
[BLUE ONLY / MONO] button/lamp
- You may remove R(red) and G(green) from the input signal and play the screen only in B(blue) signal. And
if the button hit twice, it will turn to MONO mode. (This mode use only luminance value.)
[CHROMA/PHASE/SCREEN SEL] (In Single Mode) button
- Used when changing the CHROMINCE and PHASE values during menu in-activation. One time of touch of
the button will turn the product to CHROMA mode, and if the button is hit twice, to automatic PHASE
setting.
(PHASE may be used only ANALOG mode.)
[CHROMA/PHASE/SCREEN SEL] (In Multi Mode) button
- Used to select a display in Multi Mode.
[MENU] button
- Used when OSD menu is activated.
[DOWN/BRIGHT] button
- Used when moving within the menus during OSD menu activation. It may also be used to control the
BRIGHT value during OSD menu inactivation.
[UP/CONTRAST] button
- Used when moving within the menu during OSD menu activation. It may also be used to control the
CONTRAST value during OSD menu inactivation.
[ENTER] button
- Used when confirming a chosen value (or mode) during OSD menu activation or inactivation.
[STANDBY] button
- It affords power supply, which may be indicated by indication lamp. The lamp is RED during power supply
and GREEN during system is in operation. In case of power cut and sudden shut off of the power, our
monitor keep previous setup stage.
[POWER] button
- Used when power on and off.
[TALLY] lamp
- LED indicating monitors current status.