TVLogic LQM-241W - Manual (Page 22)

LQM-241W
24” I
nt
eg
ra
te
d m
ul
ti f
orma
t HD Q
uad in
pu
t mo
ni
to
rs
20
Other Functions
This product is capable of processing all input signals usable in ANALOG mode. The ANALOG
input settings are as follows:
1. Press ANALOG button on the front of the product and activate the menu below.
2. Highlight the value you desire by using the UP/DOWN button and press the MENU
button to confirm your selection. From this point the OSD menu operates identically
to the MENU operations discussed above.
Warning!!
When using ANALOG mode, always check the input method and modify the setting
as needed for optimized output results.
Widescreen models provide not only an UNDERSCAN mode but also an SD 1:1
SCAN mode. These modes maybe selected as follows:
1. Transfer to UNDERSCAN by pressing the UNDERSCAN button on the front of the
monitor.
2. Press the UNDERSCAN button again after the mode is shifted to UNDERSCAN mode to
transfer to SD 1:1 SCAN mode.
[1] ANALOG MODE USAGE
[2] SD 1:1 SCAN MODE