TVLogic LQM-241W - Manual (Page 16)

LQM-241W
24” I
nt
eg
ra
te
d m
ul
ti f
orma
t HD Q
uad in
pu
t mo
ni
to
rs
14
Menu Contents
MARKER THICKNESS
This item controls the width of marker. The degrees of width are between 1 and 7.
USER MARKER H1 / H2
This item controls the marker of horizontal value.
USER MARKER V1 / V2
This item controls the marker of vertical value.
This product provides a REMOTE CONTROL mode. The user may connect RJ-45
jack to the REMOTE terminal on the rear of the unit and designate a function for
each pin.
The user designates function for PIN 1~PIN 6. PIN 7 is POWER ON/OFF use only. The
selectable functions are as follows:
On the pin to be used, set the function you desire with the ENTER button and UP/DOWN button.
The method of setting the value is the same as that for the MENU function discussed earlier.
[4] REMOTE PART
Menu
Classification
Settable Values
PIN 1~6
NONE, ANALOG CHANNEL, MODE CHANNEL, QUAD CHANNEL, BLUE
ONLY, SD 1:1 SCAN, UNDER SCAN, ASPECT, H/V DELAY,
16:9,15:9,14:9,13:9 MARKER, 4:3, 4:3 ON AIR MARKER, 1.85:1,
2.35:1 MARKER, 1.85:1&4:3 MARKER, CENTER MARKER,SAFETY
AREA 80% / 88% / 90% / 93%, TALLY RED, TALLY GREEN