TVLogic LQM-241W - Manual (Page 13)

24” I
nt
eg
ra
te
d m
ul
ti f
orma
t HD Q
uad in
pu
t mo
ni
to
rs
11
LQM-241W
Menu Contents
APERTURE
This item controls the picture sharpness. Sharpness select between MIN(-1) and
MAX(5).
NTSC SETUP
This item sets IRE value in NTSC mode between 0 IRE and 7.5 IRE.
FILTER
This item selects set the filter ON for smoother transitions between colors.
ORBITER CIRCUIT
This item prevents image sticking effect on LCD Panels when signal input is used. The
user may decide number of pixels to move. The number of pixels should be within range
between MIN(0) and MAX(100). Moving speed is per 10 minutes.
* Above function only works in Normal mode (not in Quad mode).
INTERNAL PATTERN
This item generates internal white pattern. The white level select between 0% and 100%
(Per 5% increase or decrease)
* Above function only works in Normal mode (not in Quad mode).
FAST MODE
This item minimize de-interlacing processing time delay. If user want to see without 1field
time delay, use this mode.
VGA H POSITION
This item controls VGA H position. It is only available on DVI analog mode.
VGA V POSITION
This item controls VGA V position. It is only available on DVI analog mode.
DITHERING
This item enables dithering to 10 bits.
FORCE psf
This item sets psf mode for psf signals.
FILM MODE DETECTION
This item enables film mode or disables.