Televes COAXDATA GATEWAY 1Gbps - Manual (Page 9)

Data Over Coax Gateway Ref.769301
Getting to know the Data Over Coax Gateway
Device connections
Ethernet ports
3 x RJ-45 ports IEEE 802.3 100 BASE-TX/10 BASE-T compliant. These ports allow the connection of
the CoaxData 1Gbps-HDTV to computers, VOIP telephones, Set Top Boxes, connected TV’s,etc. They
support speed autonegotiation and Auto-MDIX for ease and optimal working conditions.
Data input. TV + Data
Female F connector for data and TV input direct from the compatible TV socket.
TV output. TV
Female F connector to access TV channels.
Reset button / factory default configuration
Keeping the button pressed for a period under 5 seconds the device will reboot if the button is pressed
for more than 5 seconds it will reload factory configuration.
 Please take into consideration that factory default will delete all configuration done on the
equipment.
 The configuration of the coaxial interface of the product will not be affected by this button, as this
is managed by using the CoaxManager application.
 IP default adress is : 172.16.0.1/Mask: 255.255.255.0
 Default user:
Admin
password:
Televes1
Medium switch
At the back of the device this selects the transmission medium. Coaxial only (right), hybrid (coaxial &
PLC) (left).
 Signal will always be present on the coaxial network.
 The Medium LED on the front panel will bright green (Coaxial mode) or orange (Hybrid mode).
EN
www.televes.es