Televes COAXDATA GATEWAY 1Gbps User Manual

Page 28

Data Over Coax Gateway

Ref.769301

Instalation of Ref. 769301 in the TV outlets.

The following instructions show the recommended steps to connect the Data Over Coax Gateway-HDTV
from the TV socket to your computer or wired device. Please note that there is no need for additional
hardware or software drivers.



Working mode Master/Slave

: Ref. 769301 is configured to MxSlave mode. Therefore it will

automatically connect to the system Master device. Please note that all other devices on the

network must be set to MxU Slave mode using the CoaxManager Software.



Connection to a computer:

The Data Over Coax Gateway includes 3 ethernet ports supporting

100/10 Mbps. It supports speed autonegotation and MDI-X avoiding the use of crossover ethernet

cables.

•

Connect the ethernet cable to the port on your device and to the CoaxData. .

•

Verify that the configuration of the LAN card on your device is set to Auto (DHCP).

•

Write on the web browser the adress:

http:172.16.0.1

. User:

Admin

, password:

Televes1