Televes COAXDATA GATEWAY 1Gbps User Manual

Page 10

Data Over Coax Gateway

Ref.769301

WPS Button

WPS

(Wireless protected setup) allows the easy configuration of a wireless secure connection with other

devices supporting the WPS protocol. Simply push the button and activate the WPS function on the
wireless device.
The WPS function will be active for 2 minutes, during this period of time the client should stablish a

secure connection.
While the WPS mode is active the power LED will blink orange, once the connection has been finalised
the WPS mode will stop and should a connection to a different device be needed the WPS button should
be pressed again.

WiFi switch

El conmutador WiFi allows three positions and hence WiFi status:



OFF

(left ): radio is off, LED will bright red. .



Low Power

(Center): WiFi radio will be on in low power mode. This mode will reduce exposure to

radiation and interference in nearby networks. The maximum radiated power will not exceed
3dBm. In this mode the WiFi LED will bright orange.



Normal

(Right): WiFi radio will be on in normal mode. The maximum radiated power will be of 17

dBm In this mode the WiFi LED will bright green.