Advanced configuration of the device – Televes COAXDATA GATEWAY 1Gbps User Manual
Page 21
![background image](https://www.manualsdir.com/files/770532/content/doc021.png)
Data Over Coax Gateway
Ref.769301
◦
AES
: Encryption method for WPA/WPA2. This is the most robust encyption
method and the recommended option.
Autentificación WiFi
Security level
NONE
No access restriction
WEP 64-bit
VERY LOW
WEP 128-bit
LOW
WPA/PSK
AVERAGE
WPA2/PSK
AVERAGE
WPA/AES
HIGH
WPA2/AES
HIGH
Advanced configuration of the device
Routing tables
Routing tables allow setting routes based on ranges of IP adresses. For each route a gateway will be
defined. There are two ways to set these routing tables:
RIP
(Router Internet Protocol): This protocol allows different routers to exchange their routing
tables to establish the optimal route to forward IP packets.
The device can activate RIP in all or some of the interfaces.
Static Router Table
: It is possible to manually set IP routes. Tis routes are defined with the
following information:
•
Destination network
: Defined with a set of an IP Adress and a mask. For example:
10.0.0.1/255.0.0.0.
•
Gateway:
The router which will forward the traffic to their final destination.The IP Adress of the
gateway has to be within the same network range as the device.
EN
www.televes.es