TEKVOX 51T-HD Presentation Switcher - Manual (Page 28)

TEK 51T-HD Compact Presentation Switcher
TEKVOX, INC. 24 www.tekvox.com
Control TEK 51T-HD from Local or Remote 4.4.2.2

Control TEK 51T-HD from local
This is the normal operation of the TEK 51T-HD which also works with a
TekMonitor at the HDBaseT receiver.
1. Connect the RS232 port of TEK 51T-HD to RS232 port of PC.
2. Send the command 50788% (serial control mode 1, factory default) via
RS232 communication software.
3. Send any control command for the TEK 51T-HD from either RS232 port on
unit or HDBaseT receiver. Connect as shown below:
Control TEK 51T-HD from local

Control TEK 51T-HD from HDBaseT Receiver
Control TEK 51T-HD from HDBaseT Receiver