TEKVOX 51T-HD Presentation Switcher User Manual

Page 26

TEK 51T-HD Compact Presentation Switcher

TEKVOX, INC. 22 www.tekvox.com

Command

Function

Feedback Example

50910%

Confirm command

CEC cmd: select

50911%

Exit command Tog Menu

CEC cmd: exit

50912%

Pause

CEC cmd: pause

图像整体向移动

50913%

Selected Device Power On

Source power on

50914%

Selected Device Power Off

Source power off

50915%

Enable CEC Auto Power

50916%

Disable CEC Auto Power

TEKVOX Commands

511xx%

TekMonitor Macro Command

(xx= 01-30)

CMD: 01 - 30

Video Detection Feedback

Signal On / Signal Off

Note:

Turn on/ off HDCP auto-management by sending serial commands.

When HDCP is set to active, whether or not the output source has
HDCP depends on the input source. If the input source has HDCP, the
output will also have HDCP, and vice versa.

When HDCP is set to Manual, the output always enables HDCP.

Screen output adjusting avails only when the screen output adjusting is on.
Send command 50678% to turn it on.

CEC commands with grey background avails only when CEC is on.

MIC precedence: In Mute mode, if the MIC noise detecting is on, the device
will unmute MIC automatically given the outer noise exceeds the limit of noise
detection. If you send 50696% to enable MIC precedence, the device will not
be able to change the mute mode, regardless of the noise level.