TEKVOX 51T-HD Presentation Switcher - Manual (Page 27)

TEK 51T-HD Compact Presentation Switcher
TEKVOX, INC. 23 www.tekvox.com
RS232 Control Modes 4.4.2
There are two RS232 operational control modes for the TEK 51T-HD to function with.
One allows a 3
rd
party control system to operate the TEK 51T-HD using the local RS232
port on the unit while also allowing the control system to send RS232 commands to a
display via the RS232 on the HDBaseT receiver. The other (TEKVOX default) allows the
TEK 51T-HD to be controlled from both the local RS232 port on both the unit and the
HDBaseT receiver.
Control TEK 51T-HD and Display from Local RS232 port 4.4.2.1
This is the normal operation of the TEK 51T-HD which also works with a
TekMonitor at the receiver.
1. Connect the RS232 port of TEK 51T-HD to RS232 port of PC.
2. Send the command 50787% via RS232 communication software.
3. Send the right command of TEK 51T-HD or other remote RS232 device
connected in present system. Connect as shown below:
Control 51T-HD and display from local