TabletKiosk Sahara Slate PC i400 Series - Manual (Page 46)

Chapter 04: Using Your Sahara Slate PC with Windows XP
1. Tap on the “Calibration” tab
and select the desired level
of calibration accuracy.
Most of the time, a 4-point
accuracy is sufficient.
2. Tap on the “Calibrate”
button to begin the
calibration routine. Follow
the on-screen instructions
t o c o m p l e t e t h e
calibration.
3. When the calibration is
complete, you can tap on
the “Paint” button to test
your calibration results by tapping or dragging with the
stylus or a finger around the screen. Use the grid to help
visualize the alignment accuracy of your screen’s calibration.
Touch Screen Calibration
Routine: Tap in the center of
the red crosses as they appear
to calibrate the touch screen’s
input.
Touch Screen Draw Test:
Draw on the screen with the
stylus to test the screen’s
accuracy after calibration.