Presentation Switchers PS550 - Manual (Page 40)

Page 40 Presentation Switchers, Inc.
Series 500 Programming Codes Series 500 Programming Codes
Input / Source Select
CI # T Change current input selection to #.
Examples
Send Response
CI3T None Select input number 3.
CI5T None Select input number 5.
Remove all spaces in sending string. “T” is the terminator. A Carriage Return is not required/accepted. Commands follow
the AMX/AutoPatch standard of switcher communica ons - when possible.
[ ] = Op onal items
# = Replace with a number
| = OR
Get Current Input / Source
SO # T Get the current input selected by the switcher.
Examples
Send Response
SO1T (3) Requested status on output number 1 reveals 3 as the current selected input.
SO1T (5) Requested status on output number 1 reveals input 5.
Volume Up (Incremental)
+ Increase volume by 1 step. 100 steps is volume maximum.
Examples
Send Response
+ None Increased by 1 step.
+++ None Volume is increased by 3 steps.
Volume Down (Incremental)
- Decrease volume 1 step. 0 is mute.
Examples
Send Response
- None Volume is decreased 1 step.
--- None Reduced by 3 steps.