Presentation Switchers PS110 - Manual

Page 1 PS110 Quick Start Guide
Getting to Know the PS110 Getting to Know the PS110
The graphic below points out key aƩ ributes of the PS110.
Front View Front View
Back View Back View
Connections Connections
Inputs and Outputs. Using the graphic above, connect the source devices to the ports labeled
above as, “Connect Source Devices Here”, and the display at locaƟ on, “Display Output”, port.
Connect audio, if applicable.
Power. Connect the DC power supply to the locaƟ on, “DC/5V”, and the other end to your 110V/
VAC power socket. The system LED will illuminate below and to the leŌ of the DC/5V locaƟ on.
Quick Start
Connect Sources Devices Here
IR (Infra-Red) Sensor
Source Selector
Active Source Indicator
Source “Port”
Stereo Audio Output
Display Output
USB Firmware Update
EDID Resolution Select