Presentation Switchers PS550 - Manual (Page 27)

Page 27 Series 500 Installation Guide
The Series 500 has a simple control system for controlling a display device (LCD, Plasma, or
Projector) and an electronic screen. The serial port is connected directly to the display device.
Codes are uploaded and stored in the Series 500. When the system is inac ve and an input
source is selected the projector is sent a “power on” command. When the signal is lost and
a predetermined amount of me passes, the Series 500 issues a “power down” command.
Similarly, when the power on command is issued the Series 500 triggers contact closure #1 and
the projec on screen lowers. When the power down command is issued the Series 500 triggers
contact closure #2 to raise the screen.
Main Form Main Form
PS500 Display Control
Power On Codes
Power Off Codes
Input Select Code
Serial Speed of
Display
Time to Wait with
No Signal Before
Shutting Down
Projector / LCD
Bulb Life Fail Safe
Upload to the
Switcher
Read from the
Switcher
Enter Codes in Text
or HEX