Presentation Switchers PS100 - Manual

Page 1 PS100 Quick Start Guide
Getting to Know the PS100 Getting to Know the PS100
The graphic below points out key aƩ ributes of the PS100.
Front View
Back View
Connections Connections
Inputs and Outputs. Using the graphic above, connect the source devices to the ports labeled,
“Connect Source Devices Here”, as a reference and the display at locaƟ on, “Display Output”,
port. Connect audio, if applicable.
Power. Connect the DC power supply to the locaƟ on, “DC/5V”, and the other end to a 110V/
VAC power socket. The system LED will illuminate just below and to the leŌ of the DC/5V
locaƟ on.
Front View Front View
Quick Start
Connect Sources Devices Here
IR (Infra-Red) Sensor
Source Selector
Active Source Indicator
Back View Back View
Source “Port”
Stereo Audio Output
Display Output
USB Firmware Update
EDID Resolution Select