Presentation Switchers PS550 - Manual (Page 21)

Page 21 Series 500 Installation Guide
To begin, ensure that the main default screen is displayed. The main screen displays the current
input and volume level. If this screen is not currently displayed, press the Cancel bu on repeat-
edly un l the main screen is illuminated.
To set the audio line out to fi xed-level output mode follow these steps:
1. Press the volume control knob once to enter the menu mode.
2. Rotate knob to Output and press knob (or select Input 3 bu on)
3. Rotate knob to Aud Line Out and press knob (or select Input 2 bu on).
4. Rotate the knob to select Fixed Level (or select Input 2 bu on).
5. Adjust the audio line output trim to the desired a enua on level. Default is 100%.
MAIN MENU
1.>STATUS
1. RESOLUTION
2.>AUD LINE OUT
1. VOLUME ADJUST
2.>FIXED LEVEL
LINEOUT TRIM: 70