Outputs (channels c,d,e) device list – Pinnacle Systems Universal Safety Controller HUB User Manual
Page 8
Page 3 of 18
OUTPUTS (Channels C,D,E) Device List
0)
No Output Device Selected
1‐8)
Channel E1‐8
Solid State opto Relays (8)
Provides 8 +24vdc outputs (NOT
monitored). 1/2A@24vdc resistive load
(optional 1A@24vdc). (E1 is always used
as a status indicator for Channel D1‐2 [E1
active when D1/D2 active])
16)
Channel C
Mechanical Safety relays
For any Device to control C output. C1,
C2, C3 are mechanically linked.
32)
Channel D
Solid‐State Safety relays
For any Device to control D output. D1,
D2 require EDM option if linked to
external mechanical relays.
64)
Channel C4‐6
on 2
nd
Safety Hub
Channel C Safety Outputs found on 2
nd
Safety Hub
128)
Channel D3‐4
on 2
nd
Safety Hub
Channel D Solid‐State Safety outputs
found on 2
nd
Safety Hub
240)
Channel C
Timer ON
Timer function used to hold Output C ON
241)
Channel C
Timer OFF
Timer function used to hold Output C OFF
242)
Channel D
Timer ON
Timer function used to hold Output D ON
243)
Channel D
Timer OFF
Timer function used to hold Output D OFF
251)
Channel C/D
For Run Devices to Latch output C ON, D
OFF
252)
Channel C/D
For RUN or Limit Switch devices Latch
output D ON, and C OFF.
253)
Channel C/D
For RUN or Limit Switch devices to shut
down both C and D outputs.
254)
Channel C/D
For ESTOP Devices to Control both C & D
outputs
255)
Faults all Outputs (shuts down) when this
Device OPENS.