Pengo DT-5 - Manual (Page 18)

18 Two Speed (DT & RT) Series Manual
PRIME MOVER OPERATING POSITIONS
These illustrations represent the recommended working, transport and resting positions for your Pengo Drive attachment
when used with an excavator prime mover.
C) Recommended: Transport Position
Lift the Auger off the ground during transport on the
job site. Keep Auger as low as possible.
A) Recommended: Starting Position
Position the Drive and Auger vertically in desired
location and begin drilling.
B) Recommended: Drill
Lower the prime mover arms in a
consistent vertical manner.
D) Recommended: Resting / Parked
Park the prime mover with the Auger on the
ground.
E) Avoid: Drilling Position
Avoid any drilling position that is not vertical. Auger
will be unstable and not easily controlled.
F) Avoid: Drilling Position
Avoid any drilling position that is not vertical. Auger
will be unstable and not easily controlled.
G) Avoid: Transport Position
When transporting the Auger on the job site do
not allow the Auger to swing in an uncontrolled
manner. Damage can occur to the attachment
and prime mover.
H) Avoid: Resting / Parked Position
Avoid parking the prime mover with the Drive and
Auger in a suspended position.
See page 19 for proper
sequence.