Pengo DT-5 - Manual (Page 10)

10 Two Speed (DT & RT) Series Manual
PRODUCT SPECIFICATIONS
Output speed and torque specifi cations are NOT listed at 100% effi ciency. Maximum effi ciencies have been applied to the torque
and speed charts according to the manufacturers recommendations. Speed and torque output are dependent on the overall
system effi ciencies associated with the prime movers hydraulic system. When the purchaser is determining criteria for specifi c
applications please contact Pengo. Pengo has made every attempt to present accurate and suitable information published on this
document. This document should be used for information and comparative purposed only. When application specifi c information is
required, please contact Pengo.
Pengo continually looks for new ways to improve its products. Therefore, Pengo reserves the right to make changes to our
products and specifi cations without notice.
TOTAL UNIT WEIGHT 645 LBS / 292 Kg
HYDRAULIC MOTOR INFORMATION
Displacement 2.98 cu/in (97.6cc)
Motor Type Two Speed Bi-Directional
Motor Output Shaft 1-1/4" Spline 14T
Motor Mount SAE - C 4 Bolt
Motor Ports 1-5/8" - 12 UN-2B
Cross Over Pressure Relief Set @ 3100 psi
PLANETARY GEARBOX INFORMATION
Gearbox Type Planetary Two Stage
Reduction Ratio 25.36:1
Output Shaft 2-1/2" Hex
Oil Capacity 2.0 Gallons
Oil Type SAE 80W90 GL-5
Shaft Pull Out (lbs.) 22,500 lbs.
REFERENCE TORQUE CHART
Pressure PSI (Bar) High Torque (ft/lbs) Low Torque (ft/lbs)
1600 (110) 2629 1314
1800 (124) 2958 1478
2000 (137) 3287 1643
2200 (151) 3615 1807
2400 (165) 3943 1971
2600 (179) 4272 2136
2800 (193) 4601 2300
3000 (206) 4930 2465
REFERENCE SPEED CHART
Flow GPM (Liter) Low Spd (rpm) High Spd (rpm)
20 (75) 25 50
25 (95) 31 63
30 (113) 38 75
35 (132) 44 88
40 (151) 50 100
AUGER DRIVE MODEL
dt-5
Two speed models must have a minimum of 20GPM.
TOTAL UNIT WEIGHT 825 LBS / 374 Kg
HYDRAULIC MOTOR INFORMATION
Displacement 17.8 cu/in (293cc)
Motor Type Two Speed Bi-Directional
Motor Output Shaft 1-1/4" Spline 14T
Motor Mount SAE - C 4 Bolt
Motor Ports 1-5/8" - 12 UN-2B
Cross Over Pressure Relief Set @ 3100 psi
PLANETARY GEARBOX INFORMATION
Gearbox Type Planetary Two Stage
Reduction Ratio 26.52:1
Output Shaft 3" Hex
Oil Capacity 3.0 Gallons
Oil Type SAE 80W90 GL-5
Shaft Pull Out (lbs.) 22,500 lbs.
REFERENCE TORQUE CHART
Pressure PSI (Bar) High Torque (ft/lbs) Low Torque (ft/lbs)
1600 (110) 8254 4127
1800 (124) 9287 4643
2000 (137) 10318 5159
2200 (151) 11350 5674
2400 (165) 12382 6191
2600 (179) 13414 6707
2800 (193) 14445 7223
3000 (206) 15478 7738
REFERENCE SPEED CHART
Flow GPM (Liter) Low Spd (rpm) High Spd (rpm)
20 (75) 8 16
30 (113) 12 24
40 (151) 16 32
50 (190) 20 40
AUGER DRIVE MODEL
dt-15