Pengo DT-5 - Manual (Page 12)

12 Two Speed (DT & RT) Series Manual
PRODUCT SPECIFICATIONS
TOTAL UNIT WEIGHT 855 LBS / 387 Kg
HYDRAULIC MOTOR INFORMATION
Displacement 11.9 cu/in (195cc)
Motor Type Two Speed Bi-Directional
Motor Output Shaft 1-1/4" Spline 14T
Motor Mount SAE - C 4 Bolt
Motor Ports 1-5/8" - 12 UN-2B
Cross Over Pressure Relief Set @ 3100 psi
PLANETARY GEARBOX INFORMATION
Gearbox Type Planetary Three Stage
Reduction Ratio 60.56:1
Output Shaft 3" Hex
Oil Capacity 3.0 Gallons
Oil Type SAE 80W90 GL-5
Shaft Pull Out (lbs.) 45,000 lbs.
REFERENCE TORQUE CHART
Pressure PSI (Bar) High Torque (ft/lbs) Low Torque (ft/lbs)
1600 (110) 12086 6043
1800 (124) 13597 6798
2000 (137) 15108 7554
2200 (151) 16618 8309
2400 (165) 18129 9064
2600 (179) 19640 9820
2800 (193) 21151 10575
3000 (206) 22662 11331
REFERENCE SPEED CHART
Flow GPM (Liter) Low Spd (rpm) High Spd (rpm)
20 (75) 5 10
30 (113) 8 15
40 (151) 10 20
50 (190) 13 25
AUGER DRIVE MODEL
rt-20
Two speed models must have a minimum of 20GPM.
Output speed and torque specifi cations are NOT listed at 100% effi ciency. Maximum effi ciencies have been applied to the torque
and speed charts according to the manufacturers recommendations. Speed and torque output are dependent on the overall
system effi ciencies associated with the prime movers hydraulic system. When the purchaser is determining criteria for specifi c
applications please contact Pengo. Pengo has made every attempt to present accurate and suitable information published on this
document. This document should be used for information and comparative purposed only. When application specifi c information is
required, please contact Pengo.
Pengo continually looks for new ways to improve its products. Therefore, Pengo reserves the right to make changes to our
products and specifi cations without notice.
TOTAL UNIT WEIGHT 1220 LBS / 553 Kg
HYDRAULIC MOTOR INFORMATION
Displacement 13.9 cu/in (227cc)
Motor Type Two Speed Bi-Directional
Motor Output Shaft 1-1/4" Spline 14T
Motor Mount SAE - C 4 Bolt
Motor Ports 1-5/8" - 12 UN-2B
Cross Over Pressure Relief Set @ 3100 psi
PLANETARY GEARBOX INFORMATION
Gearbox Type Planetary Three Stage
Reduction Ratio 69.7:1
Output Shaft 4" Square
Oil Capacity 3.1 Gallons
Oil Type SAE 80W90 GL-5
Shaft Pull Out (lbs.) 60,000 lbs.
REFERENCE TORQUE CHART
Pressure PSI (Bar) High Torque (ft/lbs) Low Torque (ft/lbs)
1600 (110) 16250 8125
1800 (124) 18281 9140
2000 (137) 20312 10156
2200 (151) 22344 11171
2400 (165) 24375 12187
2600 (179) 26407 13203
2800 (193) 28438 14218
3000 (206) 30470 15234
REFERENCE SPEED CHART
Flow GPM (Liter) Low Spd (rpm) High Spd (rpm)
20 (75) 4 8
30 (113) 6 11
40 (151) 8 15
50 (190) 9 19
AUGER DRIVE MODEL
rt-30