Oklahoma Sound #MMC User Manual

Page 13

Step 19:

a) Place the rear drawer panel #13 between panel

#14 and #16 with the groove ﬁƫng into panel

#15.

b) Once the rear panel #13 is ﬁrmly in place and

the base panel #15 is properly inserted in all

four panels #13, #14, #16 and #17, proceed to

screw panel #13 in place, as follows.

c) Align the two holes at both edges of panel #13

with the two predrilled holes on panel #14 and

#16.

d) Use a Phillips screwdriver to screw two screws

#H through the predrilled holes on the outside

of panel #14 and #16 into the edge of panel #13

as shown in the picture.

Step 20:

Laptop shelf installaƟon: Insert the laptop shelf by

aligning the slides #U on the edge of the laptop

shelf and the slides (upper) on the inside of the

cabinets. Be certain that the shelf is inserted right

side up with the cams facing down as shown. Once

aligned ,gently push the shelf inwards to join the

two parts of the slides together. Your laptop shelf

will now pull in and out smoothly.

Drawer installaƟon: Insert the drawer by aligning

the slides #T on the edge of both sides of the draw-

er and the slides (lower) on the inside of the cabi-

nets side walls. Once aligned gently push the draw-

er inwards to join the two parts of the slides. Your

drawer will now pull in and out smoothly.

This manual is related to the following products: