Oklahoma Sound #MMC - Manual (Page 12)

12
Step 17: Drawer Assembly
a) Insert four cam bolts #A into panel #17 in
the predrilled holes as shown.
b) Insert two cam locks #B into panel #14 and
panel #16 in the predrilled holes as shown.
c) AƩach panel #14 and #16 to panel #17 by
inserƟng the two cam bolts on each end of
panel #17 into the holes at the edge of pan-
el #14 and #16 into the cam locks.
d) Once the bolts are inserted all the way into
the cam locks and the panels are flush, turn
the cam locks to Ɵghten and lock the panels
together,
e) Use the cam covers D to cover the cam
locks.
Step 18:
a) Slide panel #15 into the grooves on both
side panels #14 and #16 as shown.
b) Push the panel completely in, so that the
front of panel #15 it is firmly inside the
groove in panel #17.