Chapter 9: how to install the wwan or wi-fi module, Wwan – NEXCOM VMC 100 User Manual
Page 76
Copyright © 2014 NEXCOM International Co., Ltd. All rights reserved
62
VMC 100/1100 Series User Manual
Chapter 9: How to Install the WWAN or Wi-Fi Module
C
haPter
9: h
ow
to
I
nstall
the
wwan
or
w
I
-f
I
m
odule
1. Remove the screws on the heatsink to remove it.
2. The Mini PCI express slot shown below is used to install a WWAN or Wi-Fi
communication module.
For WWAN
module
For Wi-Fi
module
3. Insert the module into the Mini PCI Express slot at a 45 degrees angle
until the gold-plated connector on the edge of the module completely
disappears inside the slot. And then attach the RF cable to the module.
4. Install the rear cover.
This manual is related to the following products: