NEXCOM VMC 100 - Manual (Page 18)

Copyright © 2014 NEXCOM International Co., Ltd. All rights reserved 4 VMC 100/1100 Series User Manual
Chapter 1: Product Introduction
Hardware Specifications
VMC 100
General
• Cooling System: Fanless
• Enclosure: Plastic PC + ABS
• Mounting: Support VESA 75, stand mounting
• Four SMA type antenna connectors of BT/ Wi-Fi/ WWAN/ GPS
• Power Input: 9~36VDC input with ignition
• Power Consumption: 15W
• Ingress Protection: Front panel IP54
• Dimension: 213mm (W) x 145mm (H) x 50mm (D)
(8.3” x 5.7” x 1.9”)
LCD Panel
• 7-inch TFT LCD panel with LED backlight
• 800 x 480 pixels (WVGA)
• Brightness: 400 cd/m² (typical)
• Contrast ratio: 600:1 (typical)
Touch Screen Sensor
• 4-wire resistant touch
• Anti-glare coating surface
• Transmission rate: 78 ± 3%
CPU & Chipset
• ARM
® Cortex™-A8 Processor with 720MHz
Memory
• Onboard DDR3 512MB
Expandable Storage
• 1x Micro SDHC Slot (Bundle with 8GB)
Expansion
• 1x Pin Head for WLAN option
• 1x Mini-PCIe socket ((USB + UART) for WWAN option)
• OBD option and SAE J1939 protocol support
• Battery module option
I/O Interfaces - Front
• F1~ F5 functions key
• Light sensor
• Internal mic-in
• 2x Built-in 2W speakers
• 3x LED indicators (Power mode, Storage and WWAN status)
I/O Interfaces - Lateral
Right side
• 1x Micro SD card socket
• 1x SIM card socket
• 1x USB 2.0 host type A connector
• 1x Mic-in, Line-out
Left side
• 1x Power button
• 1x System reset button
• Volume up/down or Brightness up/down