Overview key features, Overview, Key features – NEXCOM VTC 1000 User Manual

Page 15

VTC 1000 User Manual

Chapter 1: Product Introduction

Overview

The VTC 1000 is an innovative in-vehicle computer for use in any car, truck,
or even for maritime applications. The design itself makes the system
available as a complete system allowing the user to easily define and build
requirements.

VTC 1000 fulfills vehicle industry requirements. The design itself is in compliance
with vehicle industrial standard such as eMark. More features required for
in-vehicle operations, such as power ignition delay control, low-power
protection and SMBus connection, etc., are continued from NEXCOM’s
other in-vehicle computer products.

The GPS function navigates drivers to ultimate the fleet management. Optional,
3.5G, GPRS, and Bluetooth availability make VTC 1000 ready for wider coverage
and future trend. Multiple display connections make VTC 1000 an ideal
choice for in-vehicle signage platforms as well.

Key Features

• Built-in Intel

Atom E640 processor

• Mini card expansion interface for WLAN and 3.5G module
• Wide range DC input from 6~36V
• Power ignition on/off delay controlled by software
• Low battery power protection setting by software
• G-Sensor support (±2 g Dual Axis Accelerometer)
• Built-in U-blox 6 GPS, optional Dead Reckoning support
• Availability of GPS, GPRS/UMTS/HSDPA
• Support CAN Bus 2.0B
• Wake-On by RTC
• Support RS-232, RS-422/485 and GPIO
• e13 Mark certification