Security save & exit, Security, Save & exit – NEXCOM NDiS M532 User Manual

Page 65

NDiS M532 User Manual

Chapter 4: BIOS Setup

Security

Advanced

Boot

Security

Save & Exit

Main

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Set Administrator Password

Password Description

If ONLY the Administrator’s password is set,

then this only limits access to Setup and is

only asked for when entering Setup.

If ONLY the User’s password is set, then this

is a power on password and must be entered to

boot or enter Setup. In Setup the User Will

have Administrator rights.

The password length must be

in the following range:

Minimum length

Maximum length

Administrator Password

User Password

Administrator Password
Select this to reconfigure the administrator’s password.

User Password
Select this to reconfigure the user’s password.

Save & Exit

Advanced

Boot

Security

Save & Exit

Main

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Reset the system after

saving the changes.

Save Changes and Exit

Discard Changes and Exit

Restore Defaults

Save & Exit

Save Changes and Exit

To save the changes and exit the Setup utility, select this field then press

. A dialog box will appear. Confirm by selecting Yes. You can also

press to save and exit Setup.

Discard Changes and Exit

To exit the Setup utility without saving the changes, select this field then

press . You may be prompted to confirm again before exiting. You

can also press to exit without saving the changes.

Restore Defaults

To restore the BIOS to default settings, select this field then press . A

dialog box will appear. Confirm by selecting Yes.