NEXCOM NDiS M532 - Manual (Page 53)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 39 NDiS M532 User Manual
Chapter 4: BIOS Setup
Advanced Boot Security Save & Exit Main
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable system to wake using
RTC alarm RTC Wake Settings
ACPI Settings
CPU Configuration
SATA Configuration
Lock Down Setting
PCH-IO Configuration
Graphics Configuration
AMT Configuration
USB Configuration
Super IO Configuration
H/W Monitor
CPU PPM Configuration
Advanced
The Advanced menu allows you to configure your system for basic operation.
Some entries are defaults required by the system board, while others, if
enabled, will improve the performance of your system or let you set some
features according to your preference.
Setting incorrect field values may cause the system to
malfunction.
RTC Wake Settings
This section is used to configure RTC Wake settings.
Exit Advanced Chipset PCIPnP Security Main
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or disable System
wake on alarm event. When
enabled, System will wake on the
hr::min::sec specified
Wake system with Fixed Time [Disabled]
Wake System with Fixed Time
Enables or disables system wake on alarm event. When enabled, system will
wake on the hr::min::sec specified.