NEXCOM NDiS M532 - Manual (Page 55)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 41 NDiS M532 User Manual
Chapter 4: BIOS Setup
Advanced Boot Security Save & Exit Main
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Determines how SATA
controller(s) operate.
SATA Controller(s)
SATA Mode Selection
Serial ATA Port 0
Software Preserve
Serial ATA Port 1
Software Preserve
[Enabled]
[IDE]
TOSHIBA MK1676 (160.0
SUPPORTED
Empty
Unknown
SATA Configuration
This section is used to configure the SATA drives.
SATA Controller(s)
Enables or disables the SATA controller.
SATA Mode Selection
Configures the SATA as IDE or AHCI mode.
IDE This option configures the Serial ATA drives as Parallel ATA
physical storage device.
AHCI This option configures the Serial ATA drives to use AHCI
(Advanced Host Controller Interface). AHCI allows the storage
driver to enable the advanced Serial ATA features which will
increase storage performance.