NEXCOM NDiS 167 - Manual (Page 68)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 54 NDiS 167 User Manual
Chapter 4: BIOS Setup
H/W Monitor
This section is used to monitor hardware status such as temperature, fan
speed and voltages.
FAN Setting
Controls the speed of the fans, the options are Always Full Speed, Enable
Smart Fan and Disable.
System Temperature 1 to System Temperature 2
Detects and displays the internal temperature of the system.
CPU Core Temperature (DTS)
Detects and displays the current CPU temperature.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 America Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
PC Health Status
FAN Setting
System temperature1
System temperature2
CPU Core Temperature (DTS)
CPU FAN speed
System FAN Speed
CPU: VCORE
+12V
+5V
+3.3V
[Always Full Speed]
: +30 C
: +31 C
: +47 C
: 9246 RPM
: 9642 RPM
: +0.948 V
: +12.250 V
: +5.017 V
: +3.327 V
FAN Setting
Always Full Speed
Enable Smart Fan
Disable
CPU FAN Speed and System FAN Speed
Detects and displays the current system fan and CPU fan speed in RPM.
CPU: VCORE
Detects and displays the Vcore CPU voltage.
12V
Detects and displays 12V voltage.
5V
Detects and displays 5V voltage.
3.3V
Detects and displays 3.3V voltage.