Chapter 3: system setup, Removing the chassis cover – NEXCOM NDiS 167 User Manual

Page 39

Text mode
Original mode

NDiS 167 User Manual

Chapter 3: System Setup

Chapter 3: System Setup

Removing the Chassis Cover

Prior to removing the chassis cover, make sure the unit’s power
is off and disconnected from the power sources to prevent
electric shock or system damage.

CAUTION!

2. With the bottom side of the chassis facing up, remove the mounting
screw of the bottom cover and then put them in a safe place for later use.

1. The screws on the bottom and back of cover are used to secure the cover
to the chassis. Remove these screws and put them in a safe place for later
use.