NEXCOM NDiS 167 - Manual (Page 17)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 3 NDiS 167 User Manual
Chapter 1: Product Introduction
▪ USB 3.0
- Supports USB wake up
- USB 3.0 Port 1~2 + USB2.0 Port 1~2 on the rear panel
- USB 3.0 Port 3~4 + USB2.0 Port 3~4 on the front panel
▪ GPIO
- 8 GPIO lines (GPI 0~3 and GPO 0~3); TTL Level (0/5V)
- 2x5 pin header, 2.54mm
▪ Others
- Onboard buzzer
- RTC reset: 1x3 pin header, 2.54mm
- 1x SIM Slot for 3G
Power Supply
▪ Onboard DC to DC
- Support power range design: +12V +/-10% DC input
- 4-pin Mini-DIN power jack
- 4-pin power connector input
- Supports power on after failure
- Supports soft off
- Supports alarm wake up
- Supports WOL
▪ External adapter
- +12V DC power adapter
RTC Battery
▪ On chip RTC with battery back up/ 1x external Li-ion battery
BIOS
▪ AMI system BIOS
▪ 64Mbits SPI flash ROM
▪ Supports Intel® AMT 8.0
System Management
▪ Monitoring
- Super IO built-in function (IT8728F)
- Monitoring of 5 voltages, 3 temperatures
4 voltages (for +3.3V, +5V, +12V, Vcore)
3 temperatures (CPU, two external temperature sensor)
2x FAN 3-pin connectors
▪ Watchdog
- Watchdog timeout is programmable by software from 1 second to
255 seconds and from 1 minute to 255 minutes
- Tolerance 15% under room temperature 25°C
Operating System Support
▪ Microsoft
- XP/ Win 7/ WES2009/ WES7
Main Board
Onboard I/O
▪ USB 2.0
- 1x JST for 4x reserved USB 2.0 ports
- 1x USB 2.0 Port to mini-PCIe1
- 1x USB 2.0 Port to mini-PCIe2